Synthesis of novel acetylene-containing amino acids

Summary.  Novel synthetic procedures for the modification of non-proteinogenic acetylene-containing amino acids have been developed. The functionalization either proceeds via zinc/copper-mediated introduction of alkyl substituents, or via tungsten-catalyzed ring-closing alkyne metathesis reactions. Received March 28, 2002 Accepted October 3, 2002 Published online December 18, 2002 Acknowledgements These investigations are supported (in part) by the Netherlands Research Council for Chemical Sciences (CW) with financial aid from the Netherlands Technology Foundation (STW). Authors' address: Floris P. J. T. Rutjes, Prof. Dr., Department of Organic Chemistry, University of Nijmegen, Toernooiveld 1, NL-6525 ED Nijmegen, The Netherlands, E-mail: rutjes@sci.kun.nl  2, selected data: ¹H NMR (300 MHz, CDCl₃) δ 5.32 (d, J = 7.7 Hz, 1H), 4.44–4.40 (m, 1H), 3.76 (s, 3H), 2.75–2.73 (d, J = 5.0 Hz, 2H), 1.44 (s, 9H); ¹³C NMR (75 MHz, CDCl₃) δ 171.0, 155.0, 80.3, 74.6, 52.6, 51.9, 41.7, 28.3, 24.0; mp = 55°C.  Typical procedure for 5: zinc dust (116 mg, 1.408 mmol) was weighed into a 20 mL flask, which was repeatedly evacuated (with heating using a heat gun) and flushed with argon. Dry DMF (0.5 mL, distilled from CaH₂) and 1,2-dibromoethane (9.2 μL, 0.106 mmol) were added and the flask was heated at 80°C for 40 min. The reaction mixture was allowed to cool to room temperature, trimethylsilyl chloride (4 μL, 0.035 mmol) was added and the resulting mixture was stirred vigorously for a further 30 min under argon. Iodocyclohexane (69 μl, 0.528 mmol) was added and stirred at room temperature for 3 h more after which stirring was ceased to settle the zinc. CuCN (41 mg, 0.458 mmol) and LiCl (40 mg, 0.915 mmol) were heated to 150°C for 2 h and cooled to room temperature. Addition of DMF (1 mL) formed a soluble CuCN·2LiCl complex within 5 min. After cooling the Cu-complex to −15°C, the organozinc reagent was added dropwise followed by the bromoacetylene 2 (116 mg, 0.352 mmol). The mixture was allowed to stir overnight at room temperature. Water was added and the suspension was extracted using heptane, washed with brine, dried (MgSO₄) and concentrated. Purification using flash column chromatography (10% EtOAc in heptane) yielded 5 (100 mg, 81%) as a colorless oil. 5: IR ν 3355, 2929, 2852, 2359, 2337, 1749, 1717, 1498, 1447, 1365, 1251, 1181, 1060; ¹H NMR (300 MHz, CDCl₃) δ 5.28 (d, J = 7.7 Hz, 1H), 4.43–4.38 (m, 1H), 3.73 (s, 3H), 2.69–2.63 (m, 2H), 2.13 (m, 1H), 1.73–1.22 (m, 10H), 1.43 (s, 9H); ¹³C NMR (75 MHz, CDCl₃) δ 171.4, 155.0, 88.1, 79.9, 73.8, 52.3, 32.7, 32.7, 28.8, 28.2, 25.8, 24.6, 23.1; HRMS (EI): calculated for C₁₇H₂₇NO₄ 309.1940, found 309.1937.  A solution of the tungsten catalyst (7 mg, 10 mol%) in C₆H₅Cl (2 mL) was treated with a solution of 14 (49.0 mg, 0.120 mmol) in C₆H₅Cl (5.0 mL) under an argon atmosphere and the resulting mixture was heated at 80°C for 3 h. Evaporation followed by flash column chromatography (80% EtOAc in heptane) afforded 15 (21.0 mg, 50%; 64% after correction for starting material) and 14 (16 mg, 33%) as colorless oils. 15: [α]_D =–14.6 (c = 1, CH₂Cl₂); IR ν 3313, 2931, 2865, 2249, 1744, 1667, 1520, 1366, 1170; ¹H NMR (400 MHz, CDCl₃) δ 7.14 (d, J = 8.7 Hz, 1H), 6.08 (d, J = 8.3 Hz, 1H), 4.78 (q, J = 6.8 Hz, 1H), 4.27 (q, J = 7.9 Hz, 1H), 3.73 (s, 3H), 2.17–2.15 (m, 4H), 2.07–1.96 (m, 2H), 1.79–1.52 (m, 4H), 1.45 (s, 9H), 0.89–0.83 (m, 2H); ¹³C NMR (100 MHz, CDCl₃) δ 173.2, 171.8, 155.8, 80.4, 80.2, 79.3, 53.8, 52.5, 51.2, 32.8 (2×), 28.1, 24.6, 24.2, 18.3 (2×); HRMS (EI): calculated for C₁₈H₂₈N₂O₅     

Exon skipping in the sterol 27-hydroxylase gene leads to cerebrotendinous xanthomatosis

We report a new mutation in the sterol 27-hydroxylase (CYP 27) gene in a Dutch family with cerebrotendinous xanthomatosis: a G→A transition in the splice donor site in intron 4. This mutation leads to skipping of exon 4, resulting in a loss of 66 amino acids in the CYP 27 enzyme molecule. Received: 15 March 1997 / Accepted: 26 March 1997     

Conformational analysis of the 3'-5'-cyclic dinucleotide d less than pApA greater than by means of molecular mechanics

The conformational properties of the cyclic dinucleotide d less than pApA greater than were studied by means of molecular mechanics calculations in which a multiconformation analysis was combined with minimum energy calculations. In this approach models of possible conformers are built by varying the torsion angles of the molecule systematically. These models are then subjected to energy minimization; in the present investigation use was made of the AMBER Force field. It followed that the lowest energy conformer has a pseudo-two-fold axis of symmetry. In this conformer the deoxyribose sugars adopt a N-type conformation. The conformation of the sugar-phosphate backbone is determined by the following torsion angles: alpha +, beta t, gamma +, epsilon t and zeta +. The conformation of this ringsystem corresponds to the structure derived earlier by means of NMR spectroscopy and X-ray diffraction. The observation of a preference for N-type sugar conformations in this molecule can be explained by the steric hindrance induced between opposite H3' atoms when one sugar is switched from N- to S-type puckers. The sugars can in principle switch from N- to S-type conformations, but this requires at least the transition of gamma + to gamma -. In this process the molecule obtains an extended shape in which the bases switch from a pseudo-axial to a pseudo-equatorial position. The calculations demonstrate that, apart from the results obtained for the lowest energy conformation, the 180 degrees change in the propagation direction of the phosphate backbone can be achieved by several different combinations of the backbone torsion angles. It appeared that in the low energy conformers five higher order correlations are found. The combination of torsion angles which are involved in changes in the propagation direction of the sugar-phosphate backbone in DNA-hairpin loops and in tRNA, are found in the dataset obtained for cyclic d less than pApA greater than. It turns out, that in the available examples, 180 degrees changes in the backbone direction are localized between two adjacent nucleotides.     

The receptor for transferrin on murine myeloma cells: one-step purification based on its physiology, and partial amino acid sequence

The receptor for transferrin is one of the major surface proteins of proliferating lymphocytes and other cells. It binds ferrotransferrin from serum and endocytoses it into an acidic nonlysosomal intracellular compartment where iron is released, but in which apotransferrin remains tightly bound to its receptor. Recycling of the apotransferrin-receptor complex to the cell surface is associated with a return to neutral pH and concomitant loss of affinity of apotransferrin for its receptor. Apotransferrin is then free to leave the cell and initiate a new cycle. We have exploited this cycle in a novel method for the purification of the receptor for transferrin. Murine myeloma cells were lysed in nonionic detergent, and the lysate passed over a column of ferrotransferrin-agarose at pH 7.4. After washing with sodium acetate at pH 5.0, iron was removed with sodium citrate pH 5.0 and desferrioxamine. Upon returning the pH to neutrality, the receptor was eluted and found to be homogeneous by SDS-polyacrylamide gel electrophoresis under both reducing and nonreducing conditions. The degree of purification was estimated to be at least 3,000-fold, and the calculated yield was 10 to 20%. The purified receptor was capable of binding to transferrin. The receptor was digested with trypsin, and the resulting peptides were separated by reversed-phase high performance liquid chromatography in NH4HCO3. Selected peptides were rechromatographed in 0.1% trifluoroacetic acid, and their amino acid sequences were determined.     

Survival of Escherichia coli in the environment: fundamental and public health aspects

In this review, our current understanding of the species Escherichia coli and its persistence in the open environment is examined. E. coli consists of six different subgroups, which are separable by genomic analyses. Strains within each subgroup occupy various ecological niches, and can be broadly characterized by either commensalistic or different pathogenic behaviour. In relevant cases, genomic islands can be pinpointed that underpin the behaviour. Thus, genomic islands of, on the one hand, broad environmental significance, and, on the other hand, virulence, are highlighted in the context of E. coli survival in its niches. A focus is further placed on experimental studies on the survival of the different types of E. coli in soil, manure and water. Overall, the data suggest that E. coli can persist, for varying periods of time, in such terrestrial and aquatic habitats. In particular, the considerable persistence of the pathogenic E. coli O157:H7 is of importance, as its acid tolerance may be expected to confer a fitness asset in the more acidic environments. In this context, the extent to which E. coli interacts with its human/animal host and the organism''s survivability in natural environments are compared. In addition, the effect of the diversity and community structure of the indigenous microbiota on the fate of invading E. coli populations in the open environment is discussed. Such a relationship is of importance to our knowledge of both public and environmental health.     

From the Schnauzenorgan to the back: Morphological comparison of mormyromast electroreceptor organs at different skin regions of Gnathonemus petersii

The nocturnally active weakly electric fish Gnathonemus petersii is known to employ active electrolocation for the detection of objects and for orientation in its environment. The fish emits pulse‐type electric signals with an electric organ and perceives these signals with more than 3,000 epidermal electroreceptor organs, the mormyromasts, which are distributed over the animal's skin surface. In this study, we measured the metric dimensions of the mormyromasts from different body regions to find structural and functional specialization of the various body parts. We focused on the two foveal regions of G. petersii, which are located at the elongated and movable chin (the Schnauzenorgan; SO) and at the nasal region (NR), the skin region between the mouth and the nares. These two foveal regions were compared to the dorsal part (back) of the fish, which contains typical nonfoveal mormyromasts. While the gross anatomy of the mormyromasts from all skin regions is similar, the metric dimensions of the main substructures differed. The mormyromasts at the SO are the smallest and contain the smallest receptor cells. In addition, the number of receptor cells per organ is lowest at the SO. In contrast, at the back the biggest receptor organs with the highest amount of receptor cells per organ occur. The mormyromasts at the NR are in several respects intermediate between those from the back and the SO. However, mormyromasts at the NR are longer than those at all other skin regions, the canal leading from the receptor pore to the inner chambers were the longest and the overlaying epidermal layers are the thickest. These results show that mormyromasts and the epidermis they are embedded in at both foveal regions differ specifically from those found on the rest of the body. The morphological specializations lead to functional specialization of the two foveae. J. Morphol., 2012. © 2012 Wiley Periodicals, Inc.